
REMORA 3D V1
Operating frequency bandsREMORA 3D version with a set of jamming modules for specific frequency bands.
Frequency modulesFinds the FPV drone's video link by itself. Jams it by itself. The operator does nothing.
REMORA 3D mounts on a heavy or strike UAV and works for the entire sortie. It listens to the air, finds the analog video link of an FPV interceptor and overrides it with a stronger signal on the same frequency. The FPV pilot loses the picture — and loses the ability to guide the drone onto your aircraft.

* Actual product appearance may differ from the images shown.
Analog FPV video has no encoding, no encryption and no error correction: the receiver shows everything it gets, interference included. The REMORA transmitter is more powerful than the drone's video transmitter, so the picture disappears completely.
An analog FPV camera reliably recognises a large UAV only from 200–250 m, while REMORA detects its signal a kilometre away — the jamming starts before the pilot sees the target.
Scanning the air: 0.5 s in the 4900–6060 MHz band, up to 3 s in the others.
The unit locks onto the analog FPV video link and determines its frequency.
One jamming cycle lasts 7 s on the same frequency with a stronger signal.
After the cycle the unit checks whether the drone is still on the same frequency. If the operator switched channels, the jamming follows within 1–2 s.
Status is shown by three indicators on the housing: POWER, SEARCH, JAMMING.
| Model | Frequency modules | When to choose |
|---|---|---|
| REMORA 3D V1 | 3000–4000 / 4000–4900 / 4900–6060 MHz | dense coverage of the main FPV bands 3–6 GHz |
| REMORA 3D V2 | 980–1785 / 3000–4000 / 4900–6060 MHz | when low frequencies are active in the sector |
| REMORA 3D V3 | 3000–4000 / 4900–6060 / 6110–7210 MHz | when FPV operate in upper bands up to 7.2 GHz |
Jamming bands are adapted to the unit's scenario; the set is agreed before manufacturing.
REMORA 3D is built on a single hardware platform. Every version runs the same algorithm:
The main difference between REMORA 3D versions is the installed jamming modules and the supported frequency bands.
Any version can be installed on a car, an armoured vehicle, a mobile platform, a fixed position or a UAV. The carrier type does not define the product version.

REMORA 3D version with a set of jamming modules for specific frequency bands.
Frequency modules
REMORA 3D version with an alternative set of frequency modules for other bands.
Frequency modules
REMORA 3D version with a set of frequency modules for the upper bands of the spectrum.
Frequency modules* Actual product appearance may differ from the images shown.
An overview of the system: automatic detection of an analogue FPV video source and jamming of the channel with no operator involved.
No. The unit scans, jams and switches to a new frequency by itself if the drone operator changes it.
About 30 seconds after power is applied.
REMORA is designed for the analog FPV video link — it has no encoding and is overridden reliably.
From a 6S4P 20 Ah battery — at least 120 minutes in jamming mode. In a real sortie, where jamming turns on in episodes, runtime is longer.
Yes, on vehicles and mobile platforms powered from the onboard network; a 12–24 V power unit is available for vehicles.
V1 — dense coverage of 3–6 GHz. V2 — when low frequencies of 980–1785 MHz are present in the sector. V3 — when FPV move to upper bands up to 7.2 GHz. Not sure? Send us the list of frequencies your reconnaissance detects, and we will select the set.
Yes, TU U 26.30-41202757-005:2026, verified by SE "Ukrmetrteststandart". A copy is provided together with the commercial offer.
Send us your task and frequency list — we will prepare a commercial offer.